From a feeling to a finished floor.
How we actually run a hotel project, and the ways you can work with us. Every hotel gets a bill of materials and a cutting list.
Six things every project gets.
Bill of materials for every hotel
Every project gets a full bill of materials (BoM): each board, veneer, edge band, fitting, fabric and stone item with quantity, specification and room reference.
Cutting list for every hotel
From the approved shop drawings we produce a cutting list per room type, so panels are cut once, labelled and traceable to the room they belong to.
Shop drawings and samples
Drawings, finish samples and, where needed, a mock-up room are approved before series production starts.
Production in our own factories
Joinery, casegoods, upholstery frames, wood and metal works are produced in our own factories in Kayseri, İzmir, Kocaeli and Sakarya.
Packed per room and floor
Every item is labelled to the BoM and packed per room and per floor, so installation runs in sequence.
Handover with documents
You receive the final BoM, care instructions and the test evidence agreed for the project.
Five ways to work with us.
Choose the model that fits your team. Every model includes a bill of materials and a cutting list.
Materials and a supervisor
You build with your own team. We supply the materials, the bill of materials and the cutting list, and send a supervisor from our side to guide the work on site.
Suits: Owners and contractors with a capable local crew
A dedicated architect
One of our architects is assigned to your hotel and works through it at a slower, considered pace: brief, concept, drawings and samples, then supply from our own factories.
Suits: Boutique and signature hotels where every detail is decided carefully
Your plan, our design and supply
Once your building permit is approved, you send us the building size, the lift shafts, cores and fixed elements. We design the interior around them and supply it turnkey.
Suits: New builds with an approved permit set
Full turnkey with installation
Design, production, logistics, installation, snagging and handover by our own teams. One contract and one point of contact up to the opening day.
Suits: Owners and operators who want a single partner
Build to your designer’s drawings
Your interior designer or brand supplies the design. We value-engineer, make shop drawings and samples, produce and ship.
Suits: Brands and design studios with a finished scheme
Six steps and one team.
Brief & feeling
We listen to your guest profile, your focus and the mood you want each space to carry.
Concept & value
Moodboards, material palettes and options with value engineering at every level.
Drawings & samples
Shop drawings, finish samples and, where needed, a mock-up room for approval.
Our factory
Joinery, upholstery-ready frames, wood and metal works produced in our own factories in Kayseri, İzmir, Kocaeli and Sakarya.
Logistics
Packed and sequenced per floor and per room, shipped to site on your programme.
Install & handover
Our teams install, snag and hand over room by room, ready for guests.
One contract
One partner covers production, supply and installation, with one point of contact for your team.
Room-by-room logistics
Everything is labelled and packed per room and per floor, so installation runs in sequence.
Approve before series
Samples, drawings and mock-ups are approved before series production begins.
Ten checkpoints between drawing and handover.
- DrawingsShop drawings for every item with dimensions, materials, finishes, hardware and fixing details, approved by your team before samples.
- Material samplesFinish samples for wood, veneer, metal, stone and fabric, labelled and kept as the approved reference for production.
- Prototype piecesFor key items (headboard, wardrobe, desk, chair) we can make a prototype first, so details are tested before the mock-up.
- Mock-up roomA complete room built in our own factory or on site, depending on the project. It is where design, operator and contractor sign off together.
- Pilot batchWhere the roll-out is large, a first small batch checks packing, transport and installation before full production.
- Series production with checksChecks at each stage: material receipt, machining, finishing and assembly, against the approved samples and drawings.
- Pre-shipment inspectionFinal inspection per batch before packing. Clients or their representatives are welcome to attend.
- Per-room packingLabelled per room and per floor in installation order, with protection suited to the transport route.
- Installation and snaggingOur teams install, snag and hand over room by room, with a snag list closed before handover.
- Handover documentationCare and maintenance notes, finish references and spare-parts information for the operator.
Shipping to our focus markets.
| Market | Usual route | Planned early |
|---|---|---|
| Malta | Usually by sea in containers from Türkiye to Malta, then by truck to site. | Container loading planned per floor; island logistics and site access checked early. |
| Germany | Usually by road with full or part truckloads across Europe; intermodal options per project. | Delivery windows to city sites agreed with the main contractor. |
| Netherlands | Usually by road; sea and road combinations where they suit the project. | Narrow city sites may need smaller vehicles and night or early deliveries. |
| Denmark | Usually by road; sea and road combinations where they suit the project. | Delivery and storage planned around the site programme. |
Türkiye and the EU are in a customs union for industrial goods, and furniture shipments usually travel with an A.TR movement certificate. Incoterms, duties, VAT, documents and transit times are agreed per project with our forwarder. All routes and timings here are indicative and confirmed per project.
Start with a feelingTell us how your guests should feel. We'll build the rest.
Put together a moodboard in a few minutes, or send us your drawings and BoQ for a quote.